Plastic bottle PE film shrink package wrapping machine with heat shrink tunnel
Use and features of the machine
Full automatic shrink packaging machine can not only be solely used, but used simultaneously with other equipment to form packaging production line. It can automatically array, aggregate and align PET beverage bottle or other similar articles, then package it with shrinking film, finally produce finished products after shrinking by heating, cooling and forming. The packaged product is firmly bound with excellent appearance, which can be opened conveniently. Therefore, it is widely used in industries such as foodstuff, medicine, chemical and other light industrial products.
1) The temperature can be controlled automatically and changed as required.
2) Isothermal sealing cutter
3) Original guide bar cylinder with steady operation
4) Programmable logic controller (PLC) control
5) Non bottom support packaging, suitable for package with different bottle diameters and different combinations
6) Simple operation and easy repair.
Main technical parameters
1. Operating voltage: three phase five line system 380V/50~60Hz
2. Working pressure: 0.6~0.8Mpa
3. Shrinking room: L×W×H=1800×650×450(mm)
4. Package efficiency: 0~12 packs per min
5. Sealing and cutting temperature: 140℃~160℃
6. Shrinking temperature: 200℃~280℃
7. Package material: PE
Film rolls width: ≤580mm
Film thickness: 0.06~0.12mm
Film diameter: ≤400mm
8. Working noise: ≤65dB
9. Total power: 22KW
1) Product conveying motor: YS6334 1400r/min 370W 2pcs
2) Motor for conveying finished product: YS6334 1400r/min 370W 1pc
3) Roll-laying motor for upper and lower film: YS5624-RV30 1400r/min 90W 2pcs
4) Cooling motor: 200FZY2-D 1400r/min 65W 6pcs
5) Drying oven motor: YSJ8012 1400r/min 750W 2pcs
6) Heating pipe for sealing and cutting: 700W 1pcs
7) Heating pipe for drying oven: Max: 21kw/220V 1.8kw/pc
Normal working: 15kw/220V 1.8ke/pc
11. Total weight: 1500kg
12. Boundary dimensions: L×W×H=5500×3200×2100(mm)
Working principle and technological flow
full automatic shrink packaging machine utilizes photoelectric switch sensor to conduct online detection with collected signal being concentrated processed by PLC (programmable logic controller) program, and uses cylinder as actuating element so as to achieve the whole processes, from conveying product to feeding material, packaging film, laying film, sealing and cutting, shrinking by heating, cooling and forming, and to finished product
Main Parts Detail
|Part of the configuration
||The use of technical
|Temperature-sealing cutting knife contraction
||Teflon Non-stick coating
|PLC Controller (Automatic core components)
|speed controller with inverter
|All Cylinder / valve (Mechanical action core components)
||Original inlet guide rod cylinder
|electronic approach switch
|Shrink machine mesh conveyor belt
||DuPont Teflon fiber
|Contraction cycle of the wind structure of chamber
||South Korea Klaus Technology
|Different functions can be selected based on models
big bag:4×6,4×5 ;
small bag,3×4,3×5 four type of package.
small bag,2×2,2×3 four type of package
2,Regarding can, we suggest adopt to package with tray, pack steadily.
4,Meet with pre-treatment filling speed of filling machine.
Package material:PE thermo shrinkage film width(200-600mm),thickness(0.08-0.12mm)
1.Efficience and convenient conmunication with tools online, e-mail and telephone.
2.The equipment we sell all have one year warranty.
3.We have advanced techincal engeinner to provide reliable after-sales service.
4.We assist to install machine freely, and we are in charge of adjustment.
5.We have many skillful technicians and we can provide professionl maintenance service.